Weigh Module

Mounting Assembly

UNV-C Bin Mount Assembly
UNV-C Weigh Modules with Lift-off protection & Self jacking arrangement has a very low profile due to use of a ring torsion compression load cell with self-aligning load button. This is ideal for Tank / Silo Weighing application.

UNV-C Tank Mount Assembly

UNV-C Weigh Modules with Lift-off protection & Self jacking arrangement has a very low profile due to use of a ring torsion compression load cell with self-aligning load button. This is ideal for Tank / Silo Weighing application.

DESB – Silo Weighing

The Tank Weighing Assembly is a fully configured weighing assembly ideal for use on tanks, silos and hoppers. The assembly includes special hardened contact points & is designed for Thermal Expansion & contraction of system.

SESB – Hopper Mount Assemblyy

The Mounting is a self-aligning due to the Load Button on top of the Load cell at Loading Point. This Assembly comes with Lift-off Protection & self- Jacking Arrangement. Ideal for Tank ./ Hopper . This can withstand vibration & is Designed for Thermal Expansion & Contraction.

SESB – Tank Mount Assembly

The Mounting is a self-aligning due to the Load Button on top of the Load cell at Loading Point. This Assembly comes with Lift-off Protection & self- Jacking Arrangement. Ideal for Tank ./ Hopper . This can withstand vibration & is Designed for Thermal Expansion & Contraction.

SESB – Rigid Mount Assembly

(SESB – RMA)
This is a Simple mounting Arrangement & is easy to install, suitable for Conveyor / Tank / Hopper weighing application)

SESB – Silo Mount Assembly

The Mounting is a self-aligning due to the design of the mounting. This Assembly is suitable for Tank / Hopper This can withstand vibration & is Designed for Thermal Expansion & Contraction.

CMP Silo Mount Assembly

The CMP weigh module comes in Pre stressed condition with Lift-off Protection & Self-Jacking arrangement . This has been designed for tank / Silo weighing Application where the Vibration Levels are slightly high.

DESB – Truck Scale Assembly

The Truck scale Assembly designed for Weighbridge is called Uni-Link Assembly. This is Self Aligning & the Rocking movement allows Controlled Floatation of Deck, thereby eliminating the use of Stay – Rods.

BBM – Conveyor Mount

The Mounting Is designed for Conveyor Scales & small Bin Weighing System. The top Loading Button can be modified to act as floating or fixed assembly, based on the usage

CMP-Hopper Mount Assembly

The Low Profile CMP weigh module comes in Pre-stressed condition with Lift-off Protection & Self-Jacking arrangement . This has been designed for tank / Silo weighing Application where the Vibration Levels are slightly high

DESB – Rigid Mount Assembly (DESB-RMA)

The Rigid Mount Assembly, with Lift off Protection & Self Jacking Arrangement (Optional) Is Ideal for Static & Dynamic Application & is designed for Thermal Expansion & contraction of system . This is Ideal for Tank / Silo / Rail mounted weighing system . This is Designed to All DESB Models

DESR- Low Profile Mounting

The Low Profile Rigid Mount Assembly Is Ideal for Static & Dynamic Application. This is Ideal for Tank / Silo & In motion weighing ( for axle weight Measurement) system . This is Designed to All DESB Models

DESR- Low Profile Mounting

The Low Profile Rigid Mount Assembly Is Ideal for Static & Dynamic Application. This is Ideal for Tank / Silo & In motion weighing ( for axle weight Measurement) system . This is Designed to All DESB Models

DESB – T – Laddle Mount Assembly

The DESB-T Laddle Weighing Assembly is a fully configured weighing assembly ideal for use on Laddle Weighing Appliation. The assembly includes special hardened contact points & is designed for Thermal Expansion & contraction of system.

DESB-T- Tank Mount Assemblyy

The DESB-T Tank Weighing Assembly is a fully configured weighing assembly ideal for use on tanks, silos and hoppers. The assembly includes special hardened contact points & is designed for Thermal Expansion & contraction of system.

SESB – Foot Mount Assembly

This is a simple & Versatile Mounting which has rubber base to dampen vibration & also has self aligning capability. This is used in conveyor / platform scales.