Weigh Module

REQUEST A QUOTE

    Mounting Assembly

    UNV-C Bin Mount Assembly

    UNV-C Weigh Modules with Lift-off protection & Self jacking arrangement has a very low profile due to the use of a ring torsion compression load cell with self-aligning load button. This is ideal for Tank / Silo Weighing application(s).

    Datasheet

    UNV-C Tank Mount Assembly

    UNV-C Weigh Modules with Lift-off protection & Self jacking arrangement has a very low profile due to the use of a ring torsion compression load cell with self-aligning load button. This is ideal for Tank / Silo Weighing application(s).

    Datasheet

    DESB – Silo Weighing

    The Tank Weighing Assembly is a fully configured weighing assembly ideal for use on tanks, silos and hoppers. The assembly includes special hardened contact points & is designed for Thermal Expansion & contraction of the system.

    Datasheet

    SESB – Hopper Mount Assemblyy

    The Mounting is self-aligning due to the Load Button on top of the Load cell at Loading Point. This Assembly comes with Lift-off Protection & self- Jacking Arrangement. Ideal for Tank / Hopper. This can withstand vibration & is Designed for Thermal Expansion & Contraction.

    Datasheet

    SESB – Tank Mount Assembly

    The Mounting is self-aligning due to the Load Button on top of the Load cell at Loading Point. This Assembly comes with Lift-off Protection & self- Jacking Arrangement. Ideal for Tank / Hopper. This can withstand vibration & is Designed for Thermal Expansion & Contraction.

    Datasheet

    SESB – Rigid Mount Assembly

    (SESB – RMA)

    This is a Simple mounting Arrangement & is easy to install, suitable for Conveyor / Tank / Hopper weighing application.

    Datasheet

    SESB – Silo Mount Assembly

    The Mounting is self-aligning due to the design of the mounting. This Assembly is suitable for Tank / Hopper, This can withstand vibration & is Designed for Thermal Expansion & Contraction.

    Datasheet

    CMP Silo Mount Assembly

    The CMP weigh module comes in Prestressed condition with Lift-off Protection & Self-Jacking arrangement. This has been designed for tank / Silo weighing Application(s) where the Vibration Levels are slightly high.

    Datasheet

    DESB – Truck Scale Assembly

    The Truck scale Assembly designed for Weighbridge is called Uni-Link Assembly. This is Self Aligning & the Rocking movement allows Controlled Floatation of Deck, thereby eliminating the use of Stay – Rods.

    Datasheet

    BBM – Conveyor Mount

    The Mounting is designed for Conveyor Scales & small Bin Weighing System. The top Loading Button can be modified to act as floating or fixed assembly, based on the usage.

    Datasheet

    CMP-Hopper Mount Assembly

    The Low Profile CMP weigh module comes in Pre-stressed condition with Lift-off Protection & Self-Jacking arrangement. This has been designed for tank / Silo weighing application where the Vibration Levels are slightly high.

    Datasheet

    DESB – Rigid Mount Assembly (DESB-RMA)

    The Rigid Mount Assembly, with Lift off Protection & Self Jacking Arrangement (Optional) is ideal for Static & Dynamic Application & is designed for Thermal Expansion & contraction of system. This is Ideal for Tank / Silo / Rail mounted weighing system. This is designed to All DESB Models.

    Datasheet

    DESR- Low Profile Mounting

    The Low Profile Rigid Mount Assembly is ideal for Static & Dynamic Application. This is Ideal for Tank / Silo & In motion weighing (for axle weight Measurement) system. This is designed to All DESB Models.

    Datasheet

    DESR- Low Profile Mounting

    The Low Profile Rigid Mount Assembly Is Ideal for Static & Dynamic Application. This is Ideal for Tank / Silo & In motion weighing ( for axle weight Measurement) system . This is Designed to All DESB Models

    Datasheet

    DESB – T – Tank Mount Assembly (Low Capacity)

    The DESB-T Ladle Weighing Assembly is a fully configured weighing assembly ideal for use on ladle weighing applications. The assembly includes special hardened contact points and is designed for thermal expansion and contraction of the system.

    Datasheet

    DESB-T- Tank Mount Assembly (High Capacity)

    The DESB-T Tank Weighing Assembly is a fully configured weighing assembly ideal for use on tanks, silos, and hoppers. The assembly includes special hardened contact points and is designed for thermal expansion and contraction of the system.

    Datasheet

    SESB – Foot Mount Assembly

    This is a simple and versatile mounting that has a rubber base to dampen vibration and also has self-aligning capability. It is used in conveyor/platform scales.

    Datasheet

    Specification and Dimensions are subject to change without notice and do not constitute any liability whatsoever

    Mounting Assembly

    UNV-C Bin Mount Assembly

    UNV-C Weigh Modules with Lift-off protection & Self jacking arrangement has a very low profile due to the use of a ring torsion compression load cell with self-aligning load button. This is ideal for Tank / Silo Weighing application(s).

    UNV-C Tank Mount Assembly

    UNV-C Weigh Modules with Lift-off protection & Self jacking arrangement has a very low profile due to the use of a ring torsion compression load cell with self-aligning load button. This is ideal for Tank / Silo Weighing application(s).

    DESB – Silo Weighing

    The Tank Weighing Assembly is a fully configured weighing assembly ideal for use on tanks, silos and hoppers. The assembly includes special hardened contact points & is designed for Thermal Expansion & contraction of the system.

    SESB – Hopper Mount Assemblyy

    The Mounting is self-aligning due to the Load Button on top of the Load cell at Loading Point. This Assembly comes with Lift-off Protection & self- Jacking Arrangement. Ideal for Tank / Hopper. This can withstand vibration & is Designed for Thermal Expansion & Contraction.

    SESB – Tank Mount Assembly

    The Mounting is self-aligning due to the Load Button on top of the Load cell at Loading Point. This Assembly comes with Lift-off Protection & self- Jacking Arrangement. Ideal for Tank / Hopper. This can withstand vibration & is Designed for Thermal Expansion & Contraction.

    SESB – Rigid Mount Assembly

    (SESB – RMA)

    This is a Simple mounting Arrangement & is easy to install, suitable for Conveyor / Tank / Hopper weighing application.

    SESB – Silo Mount Assembly

    The Mounting is self-aligning due to the design of the mounting. This Assembly is suitable for Tank / Hopper, This can withstand vibration & is Designed for Thermal Expansion & Contraction.

    CMP Silo Mount Assembly

    The CMP weigh module comes in Prestressed condition with Lift-off Protection & Self-Jacking arrangement. This has been designed for tank / Silo weighing Application(s) where the Vibration Levels are slightly high.

    DESB – Truck Scale Assembly

    The Truck scale Assembly designed for Weighbridge is called Uni-Link Assembly. This is Self Aligning & the Rocking movement allows Controlled Floatation of Deck, thereby eliminating the use of Stay – Rods.

    BBM – Conveyor Mount

    The Mounting is designed for Conveyor Scales & small Bin Weighing System. The top Loading Button can be modified to act as floating or fixed assembly, based on the usage.

    CMP-Hopper Mount Assembly

    The Low Profile CMP weigh module comes in Pre-stressed condition with Lift-off Protection & Self-Jacking arrangement. This has been designed for tank / Silo weighing application where the Vibration Levels are slightly high.

    DESB – Rigid Mount Assembly (DESB-RMA)

    The Rigid Mount Assembly, with Lift off Protection & Self Jacking Arrangement (Optional) is ideal for Static & Dynamic Application & is designed for Thermal Expansion & contraction of system. This is Ideal for Tank / Silo / Rail mounted weighing system. This is designed to All DESB Models.

    DESR- Low Profile Mounting

    The Low Profile Rigid Mount Assembly is ideal for Static & Dynamic Application. This is Ideal for Tank / Silo & In motion weighing (for axle weight Measurement) system. This is designed to All DESB Models.

    DESR- Low Profile Mounting

    The Low Profile Rigid Mount Assembly Is Ideal for Static & Dynamic Application. This is Ideal for Tank / Silo & In motion weighing ( for axle weight Measurement) system . This is Designed to All DESB Models

    DESB – T – Tank Mount Assembly (Low Capacity)

    The DESB-T Laddle Weighing Assembly is a fully configured weighing assembly ideal for use on Laddle Weighing Application. The assembly includes special hardened contact points & is designed for Thermal Expansion & contraction of the system.

    DESB-T- Tank Mount Assembly (High Capacity)

    The DESB-T Tank Weighing Assembly is a fully configured weighing assembly ideal for use on tanks, silos and hoppers. The assembly includes special hardened contact points & is designed for Thermal Expansion & contraction of the system.

    SESB – Foot Mount Assembly

    This is a simple & Versatile Mounting which has a rubber base to dampen vibration & also has self-aligning capability. This is used in conveyor/platform scales.

    Specification and Dimensions are subject to change without notice and do not constitute any liability whatsoever

    REQUEST A QUOTE